worldcreation.info Manuals Peugeot 307 Cc User Manual Pdf

PEUGEOT 307 CC USER MANUAL PDF

Friday, July 12, 2019


Peugeot CC - Owner's Manual ( pages). Posted on 2 Aug, by Vergingondisgust. Model: Peugeot CC. File size: MB. Download Peugeot CC - Owner's Manual. Posted on 2 Aug, by Vergingondisgust. Model: Peugeot CC. Peugeot CC - Owner's Manual ( pages). Posted on 2 Aug, by Theronster. Model: Peugeot CC. File size: MB.


Peugeot 307 Cc User Manual Pdf

Author:HERLINDA CAMMACK
Language:English, Spanish, Hindi
Country:Bolivia
Genre:Religion
Pages:229
Published (Last):13.12.2015
ISBN:558-4-52132-692-1
ePub File Size:16.43 MB
PDF File Size:9.14 MB
Distribution:Free* [*Registration Required]
Downloads:25976
Uploaded by: ROMEO

Peugeot CC - Owner's Manual ( pages). Posted on 2 Aug, by Badjokes. Model: Peugeot CC. File size: MB. View and Download PEUGEOT owner's manual online. Automobile pdf manual download. Automobile PEUGEOT CC Handbook. (16 pages). This website was designed to provide the best user experience and help you download Haynes Peugeot Cc Manual pdf quickly and effortlessly. Our.

Central adjustable and closing vents. The key allows you to switch on the ignition and mechanically and independently operate the lock on the glove box, the fuel iller cap, the passenger air bag disarming switch and the boot opening button disarm-ing switch.

From the driver's door, the key allows you to electrically control the locking, deadlocking and unlocking of the doors, as well as the folding and un-folding of the exterior mirrors. Locking Press button B to lock the vehicle. This is conirmed by ixed lighting of the direction indicators for approximately two seconds.

Partial opening of the boot Press button D. As soon as you remove the child seat, turn the air bag switch to the ON position, to activate the air bag again. With the ignition on, il-lumination of this warning light indicates that the pas-senger air bag is disarmed switch in the OFF posi-tion. The warning light remains on throughout the duration of disarm-ing. Unlocking Press button C to unlock the vehicle.

This is conirmed by rapid lashing of the direction indicators for approximately two seconds. STOP position: The ignition is off. Running position: The ignition is on and the accessories can be used. Starting position: Operates the starter. F Move control 8 in all four directions to adjust. F Return control 7 to the centre position. F Adjust the height and depth of the steering wheel. F Lock it by pushing handle A in fully. Driver's electric window. Passenger's electric window.

Rear right electric window. Rear left electric window. Disarming the rear window switches.

Simultaneous control of all four windows. Manual operation: F Press or pull the switch lightly. The window stops as soon as the switch is released. Automatic operation: F Press or pull the switch irmly.

One touch completely opens or closes the window. Forwards-backwards adjustment. Driver or passenger seat height adjustment. Seat back angle adjustment. Access to the rear seats. Head restraint height and angle adjustment. Never drive with the head restraints removed. Heated seats control. F Ensure that the screen 1 is hooked on securely. F Check that no object could hinder the movement of the roof: - no objects should be placed on the rear parcel shelf, on the screen 1 or on or near the hin-ged covers 2 , - if luggage is transported in the boot, this must not push the screen upwards, - any object placed in the boot, such as a jacket or an umbrella, must be retained by the lug-gage retaining net 3 to avoid it becoming trapped by the boot sill 4.

Opening the roof F Pull button 5 until the roof opening operation is complete, conirmed by an audible signal and a message on the multifunction display. Closing the roof F Press button 5 until the roof closing operation is complete, conirmed by an audible signal and a message on the multifunction display.

Note: if you continue to pull or press button 5 once the cycle is complete, the four windows rise again. When carrying out roof opening or closing operations, to avoid any risk of injury, ensure that there is no one in the proximity of the moving parts. Operation of the roof is the sole responsibility of the driver. To guarantee correct operation, do not release button 5 when the roof is in an intermediate position neither completely open nor completely closed.

However, in the event of danger, release the control button and the operation will stop instantly. Once the danger has been eliminated, complete the operation. F Turn the ignition key to position M. It is advisable to carry out the operation with the engine run-ning. When washing your vehicle: - do not forget to lock it to avoid any risk of automatic partial opening of the windows, - avoid spraying the upper part of the windows. Automatic comfort programme.

It is preferable to use automatic mode, which optimises all of the functions: temperature, air low, air distribution and air recirculation. Note: in the cabriolet position, the effectiveness of the system may be reduced. Driver's temperature adjustment. Passenger temperature adjustment. Automatic visibility programme. Air distribution adjustment. Air low adjustment. Rear screen and mirrors demisting.

I Intermittent wipe. Windscreen wash-wipe: pull the stalk towards you. Side lights. Front fog lamps irst rotation of the ring forwards Front fog lamps and rear fog lamp second rotation of the ring for-wards Switching off: rotation of the ring backwards. Automatic switching on of the lights.

Activate or deactivate this function by going to the multifunction display con-iguration menu. Decreasing of the speed. Increasing of the speed. The settings must be programmed with the engine running. Pressing the button enables you to alternate between the display of the activated function and the distance recorder displays. SPORT button. SNOW button.

Switching on. Activate or deactivate this function by going to the multifunction display coniguration menu. When reverse gear is engaged, you are guided by an audible signal and a graphic on the multifunction display during reversing manoeuvres. Once selected, the indicator light which corresponds to the position is displayed on the instrument panel display.

Starting the engine With the handbrake on, select posi-tion P or N. Switch on the ignition. Moving off With the engine running, in P or N , with your foot on the brake, release the handbrake. Select position R, D or M. Gradually release the brake pedal; the vehicle moves off immediately. Stowing rings. Luggage retaining net. Increase by pressing the back 2. MENU: displaying of the general menu. Sound sources 5.

Higher stored station - Next CD 7. DARK: 1st press: black screen under the banner - 2nd press: completely black screen - 3rd press: return to the display. Keypad 3 Storing of the radio station. Selection of the stored station, of the CD in relation to the position in the CD changer. Button B CD eject. PTY: access to the search by type of programme. Telephone keypad - description in-putting alphanumeric keypad.

Keypad 5 Navigator. Movement by rotation of the dial or by pressing the arrows. Conirmation or displaying of the contextual menus by pressing the dial. Button B Emergency call. Button C CD eject. AUDIO: access to the musical ambi-ence settings.

Keypad 2 TEL green : pick up an incoming call. TEL red : hang up. Keypad 4 MODE: changing of the display of the permanent application audio equip-ment, navigation, ESC Escape : cancellation of the operation in progress. Location D SIM card lap. Engine oil temperature indicator. Rev counter. Coolant temperature indicator. Low fuel level warning light. Fuel gauge.

Trip recorder zero reset button. Lighting rheostat button.

Left-hand direction indicator. Central STOP warning light. Right-hand direction indicator. Service warning light. Handbrake, brake luid level and electronic brake force distribution warning light. Anti-lock braking system ABS warning light.

Emission control system warning light. Air bags and rear, protective pop-up roll-over hoops warning light. Dipped beam headlamps indicator light. Main beam headlamps indicator light. Front fog lamps indicator light. Rear fog lamp indicator light. Diesel engine pre-heat warning light. Page 15 Instruments and controls 18 1. Sport programme indicator light. Gear lever position indicator.

Snow programme indicator light. Some warning lights may be linked to buzzers and a message on the multifunction display. If the Central STOP warning light comes on when you are driving, stop immediately where it is safe to do so. Central STOP warning light This light comes on for a few seconds each time the igni-tion is switched on. Stop immediately if it lashes with the engine running.

It also comes on if a wheel is punc-tured, accompanied by an audible signal and a message on the multi-function display locating the wheel concerned. Service warning light This light comes on for a few seconds each time the ignition is switched on. During regeneration of the particle emission ilter, relay noise may be heard under the fascia panel. There is a risk of damage to the injection system. Stop immediately.

Warning: wait for the engine to cool before topping up the level. The cooling system is pressurised. In order to avoid any risk of scalding, unscrew the cap by two turns to allow the pressure to drop.

When the pressure has dropped, remove the cap and top up the level. Page 17 Instruments and controls 20 Air bags and rear, protective, pop-up roll-over hoops warning light This comes on for a few seconds each time the igni-tion is switched on.

Illumination of this warning light, with the engine running, is accompanied by an audible signal and a message on the multifunction display indicat-ing: - a fault in the front air bags or side air bags, or - a fault in the pop-up roll-over hoops, located in the rear head restraints.

Emission control system warning light This comes on each time the ignition is switched on. It should switch off a few seconds after the engine is started.

If the light comes on when the en-gine is running, accompanied by an audible signal and a message on the multifunction display, this indicates a malfunction of the emission control system.

Anti-lock braking system ABS warning light This light comes on for a few seconds each time the ignition is switched on. However, the vehicle retains conven-tional servo-assisted braking.

Illumination of this light is accompa-nied by an audible signal and a mes-sage on the multifunction display. If the light remains on or comes on when the engine is running and the vehicle is moving, it is accompanied by an audible signal and a message on the multifunction display; contact a PEUGEOT dealer. When the engine is running and the vehicle is moving, it lashes if the system is activated. It is lit permanently when it is dis-armed.

Handbrake, low brake luid level and electronic brake force distribution fault warning light Linked to the central STOP warning light. This comes on for a few seconds each time the ignition is switched on. Illumination of this light is accom-panied by an audible signal and a message on the multifunction display indicating: - that the handbrake is applied or has not been released correctly, when the vehicle is moving, - an excessive drop in the brake luid if the light remains on even with the handbrake released , - a malfunction of the electronic brake force distribution, if linked to the ABS warning light.

Stop immediately in the last two cases. When the engine is running, the en-gine oil pressure warning message is accompanied by an audible signal. If there is a lack of oil in the lubrication circuit, top up the level. If the passenger air bag is disarmed, the indicator light remains on. Diesel engine pre-heat warning light This comes on for a few seconds each time the igni-tion is switched on. Wait until it is switched off before op-erating the starter. The illumination of this warning light when the engine is running is accompanied by an audible signal and a message on the multifunction display.

Depending on the country, this warn-ing light may be replaced by the serv-ice warning light. It may indicate: - faulty operation of the charging circuit, - slack battery or starter terminals, - a cut or slack alternator belt, - an alternator failure.

Low fuel level warning light This comes on for a few seconds each time the ignition is switched on. When this light comes on with the engine running, it is accompanied by an audible signal and a message on the multifunction display. When the warning light comes on, you have enough fuel to drive approximately 30 miles 50 km. The tank capacity is approximately 60 litres. The illumination of this warning light, when the engine is running, is accompanied by an audible signal and a message on the multifunction display.

If there is a lack of oil in the lubrica-tion circuit, top up the level. Page 19 Instruments and controls 22 Engine oil temperature indicator When the engine is running, this indicates the oil temperature. The temperature is too high if the maximum graduation is reached. You must stop immediately.

Park Automatic gearbox lever positions indicator Reverse Neutral Drive Manual mode: 1 st gear engaged 2 nd gear engaged 3 rd gear engaged 4 th gear engaged Coolant temperature indicator When the needle is in zone A, the temperature is correct.

When the needle is in zone B, the temperature is too high. The central STOP warning light lashes, accompanied by an audible signal and a message on the multifunction display.

Warning : wait for the engine to cool before topping up the level. In order to avoid any risk of scalding, unscrew the cap two turns to allow the pressure to drop. When the pressure has dropped, re-move the cap and top up the level. It also displays the information relat-ing to the cruise control or speed lim-iter, when either of these is activated see corresponding section. Service indicator This indicates when the next service is due in accordance with the manu-facturer's servicing schedule.

The point at which the next service is due is calculated from the last indicator zero reset see correspond-ing section. It is determined by two parameters: - the distance travelled, - the time which has elapsed since the last service. Note: the distance remaining before the next service may be weighted by the time factor, depending on the us-er's driving habits.

Operation For 5 seconds after the ignition is switched on, the spanner symbolis-ing the servicing operations comes on; the distance recorder display indicates the number of miles [kilo-metres] rounded off remaining until the next service.

For ive sec-onds after the ignition is switched on, the display indicates: In the event of under-revving or over-revving, the gear selected lashes for a few seconds, then the actual gear engaged is displayed. This comes on when the au-tomatic gearbox SNOW operating programme is selected. Automatic gearbox indicator lights SNOW indicator light Invalid value during manual operation This is displayed if a gear is not engaged correctly selector between two posi-tions.

However, if you carry out the service yourself, the re-set procedure is as follows: F Switch off the ignition, F Press and hold the trip recorder re-set button, F Switch on the ignition. The display begins a countdown. Important: after this operation, if you wish to disconnect the battery, lock the vehicle and wait for at least ive minutes, otherwise the zero re-set will not be registered. The service is overdue. The service spanner lashes for 5 seconds after the ignition is switched on.

For 5 seconds after the ignition is switched on, the display indicates: 5 seconds after the ignition was switched on, the distance recorder resumes its normal operation and the service spanner remains lit.

The display indicates the total and trip distance. Note: the service spanner may also come on if more than two years have elapsed since the last service. The distance remaining to the next service is less than miles 1, km. Example: miles km re-main before the next service. For 5 seconds after the ignition is switched on, the indicator displays: 5 seconds after the ignition was switched on, the distance recorder resumes its normal operation and the spanner remains lit.

It indicates that a service must be carried out soon. The display indi-cates the total and trip distance. Select position R, D or M. Gradually release the brake pedal; the vehicle moves off immediately. Stowing rings. Luggage retaining net. Increase by pressing the back 2. Sound sources 5. Higher stored station - Next CD 7.

Keypad 3 Storing of the radio station. Selection of the stored station, of the CD in relation to the position in the CD changer. Button B CD eject. Button C TA: Telephone keypad - description in-putting alphanumeric keypad. Keypad 5 Navigator. Movement by rotation of the dial or by pressing the arrows.

Conirmation or displaying of the contextual menus by pressing the dial. Button B Emergency call. Button C CD eject. Keypad 2 TEL green: TEL red: Keypad 4 MODE: ESC Escape: Location D SIM card lap. Engine oil temperature indicator. Rev counter. Coolant temperature indicator. Low fuel level warning light. Fuel gauge. Trip recorder zero reset button. Lighting rheostat button. Left-hand direction indicator. Central STOP warning light. Right-hand direction indicator. Service warning light. Handbrake, brake luid level and electronic brake force distribution warning light.

Anti-lock braking system ABS warning light. Emission control system warning light. Air bags and rear, protective pop-up roll-over hoops warning light. Dipped beam headlamps indicator light. Main beam headlamps indicator light. Front fog lamps indicator light. Rear fog lamp indicator light. Diesel engine pre-heat warning light. Instruments and controls 18 1. Sport programme indicator light. Gear lever position indicator. Snow programme indicator light. Some warning lights may be linked to buzzers and a message on the multifunction display.

Do not ignore this warning: If the Central STOP warning light comes on when you are driving, stop immediately where it is safe to do so. Central STOP warning light This light comes on for a few seconds each time the igni-tion is switched on. Stop immediately if it lashes with the engine running. It also comes on if a wheel is punc-tured, accompanied by an audible signal and a message on the multi-function display locating the wheel concerned. Service warning light This light comes on for a few seconds each time the ignition is switched on.

If it remains on or comes on when the engine is running, accompanied by an audible signal and a message on the multifunction display, it indicates one of the following: During regeneration of the particle emission ilter, relay noise may be heard under the fascia panel. There is a risk of damage to the injection system. Stop immediately. The cooling system is pressurised. In order to avoid any risk of scalding, unscrew the cap by two turns to allow the pressure to drop.

When the pressure has dropped, remove the cap and top up the level. Instruments and controls 20 Air bags and rear, protective, pop-up roll-over hoops warning light This comes on for a few seconds each time the igni-tion is switched on.

Illumination of this warning light, with the engine running, is accompanied by an audible signal and a message on the multifunction display indicat-ing: Emission control system warning light This comes on each time the ignition is switched on.

It should switch off a few seconds after the engine is started. If the light comes on when the en-gine is running, accompanied by an audible signal and a message on the multifunction display, this indicates a malfunction of the emission control system. Anti-lock braking system ABS warning light This light comes on for a few seconds each time the ignition is switched on. However, the vehicle retains conven-tional servo-assisted braking. Illumination of this light is accompa-nied by an audible signal and a mes-sage on the multifunction display.

If the light remains on or comes on when the engine is running and the vehicle is moving, it is accompanied by an audible signal and a message on the multifunction display; contact a PEUGEOT dealer. When the engine is running and the vehicle is moving, it lashes if the system is activated. It is lit permanently when it is dis-armed.

Handbrake, low brake luid level and electronic brake force distribution fault warning light Linked to the central STOP warning light. This comes on for a few seconds each time the ignition is switched on. Illumination of this light is accom-panied by an audible signal and a message on the multifunction display indicating: Stop immediately in the last two cases.

When the engine is running, the en-gine oil pressure warning message is accompanied by an audible signal. If there is a lack of oil in the lubrication circuit, top up the level. If the passenger air bag is disarmed, the indicator light remains on. Diesel engine pre-heat warning light This comes on for a few seconds each time the igni-tion is switched on.

Wait until it is switched off before op-erating the starter. The illumination of this warning light when the engine is running is accompanied by an audible signal and a message on the multifunction display. Depending on the country, this warn-ing light may be replaced by the serv-ice warning light. It may indicate: Low fuel level warning light This comes on for a few seconds each time the ignition is switched on.

When this light comes on with the engine running, it is accompanied by an audible signal and a message on the multifunction display. When the warning light comes on, you have enough fuel to drive approximately 30 miles 50 km. The tank capacity is approximately 60 litres. The illumination of this warning light, when the engine is running, is accompanied by an audible signal and a message on the multifunction display.

If there is a lack of oil in the lubrica-tion circuit, top up the level. Instruments and controls 22 Engine oil temperature indicator When the engine is running, this indicates the oil temperature. The temperature is too high if the maximum graduation is reached. You must stop immediately. When the needle is in zone B, the temperature is too high. The central STOP warning light lashes, accompanied by an audible signal and a message on the multifunction display.

In order to avoid any risk of scalding, unscrew the cap two turns to allow the pressure to drop. When the pressure has dropped, re-move the cap and top up the level. It also displays the information relat-ing to the cruise control or speed lim-iter, when either of these is activated see corresponding section.

Service indicator This indicates when the next service is due in accordance with the manu-facturer's servicing schedule. The point at which the next service is due is calculated from the last indicator zero reset see correspond-ing section.

It is determined by two parameters: Operation For 5 seconds after the ignition is switched on, the spanner symbolis-ing the servicing operations comes on; the distance recorder display indicates the number of miles [kilo-metres] rounded off remaining until the next service. For ive sec-onds after the ignition is switched on, the display indicates: In the event of under-revving or over-revving, the gear selected lashes for a few seconds, then the actual gear engaged is displayed.

This comes on when the au-tomatic gearbox SNOW operating programme is selected. Automatic gearbox indicator lights SNOW indicator light Invalid value during manual operation This is displayed if a gear is not engaged correctly selector between two posi-tions.

SPORT indicator light. However, if you carry out the service yourself, the re-set procedure is as follows: F Switch off the ignition, F Press and hold the trip recorder re-set button, F Switch on the ignition. The display begins a countdown. The service is overdue. The service spanner lashes for 5 seconds after the ignition is switched on. For 5 seconds after the ignition is switched on, the display indicates: The display indicates the total and trip distance.

The distance remaining to the next service is less than miles 1, km. For 5 seconds after the ignition is switched on, the indicator displays: It indicates that a service must be carried out soon. The display indi-cates the total and trip distance. When the lighting reaches the minimum or maximum setting, release the button then press it again to increase or re-duce the brightness.

As soon as the lighting is of the re-quired brightness, release the button. Trip recorder zero reset button With the ignition on, press the button until the zeros appear. Pressing the button enables you to alternate between the distance re-corder and cruise control or speed limiter displays, when either of these is activated. Engine oil level indicator When the ignition is switched on, the engine oil level is indicated for a few seconds, after the service informa-tion.

Oil level correct Oil level gauge fault Flashing of OIL indicates a malfunction of the engine oil level gauge. The level read will only be correct if the vehicle is on level ground and the engine has been off for more than 15 minutes.

Flashing of OIL , linked with the service warning light, accompa-nied by an audible signal and a mes-sage on the multifunction display, indicates a lack of oil which could damage the engine. If the lack of oil is conirmed by a check using the dipstick, it is essen-tial that the level is topped up.

Lack of oil Dipstick There are 2 marks on the dipstick: Monochrome screen CT -the vehicle tab with: Zero re-set When the required route is displayed, press the button for more than two seconds.

Monochrome screens C - the vehicle tab with: This igure may increase if there is a change in the style of driving or the road surface, producing a signiicant drop in current con-sumption. When the range is less than 20 miles 30 km , dashes are displayed. After illing with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 62 miles km.

Current consumption This is the average quantity of fuel con-sumed during the last few seconds. Average consumption This is the average fuel consump-tion since the computer was last set to zero. Distance travelled This indicates the distance travelled since the computer was last set to zero.

The routes 1 and ''2'' are independ-ent but have identical application. Route 1 for example allows you to make daily calculations and route 2 monthly calculations. Distance remaining to be travelled This is the distance remaining to the inal destination.

It can either be cal-culated continuously by the naviga-tion system if guidance is activated, or entered by the user. If the distance is not entered, dashes are displayed in place of the digits.

Average speed This is the average speed calculated since the computer was last set to zero with the ignition on. The routes Range This shows the distance that can still be covered with the fuel remaining in the tank in accordance with the aver-age consumption over the last few miles kilometres driven. Select the icon ''On-board com-puter'' , then validate to access its menu.

Depending on the multifunction display, this menu offers various choices: Enter distance to destination If guidance has not been activated, this enables you to enter an approxi-mate distance to inal destination value, to permit all of the on-board computer calculations.

Warning log This summarises the active warning messages, displaying them in suc-cession on the multifunction display. Status of the functions This summarises the active or not active status of the functions present on the vehicle.

Diagnostics This presents the information relating to the warning log, as regards the en-ergy remaining in the back-up battery and the number of satellites which can be seen by the GPS system. Presentation It displays the following information: De-pollution system faulty or infor-mation messages e.

Automatic headlamp lighting activated , dis-played temporarily, can be cleared by pressing the ESC button, - the trip computer see correspon-ding section.

Turn the navigator to select the menu required, then conirm by pressing the navigator. Personalisation-Coniguration menu Once this menu has been selected, you can access the following func-tions: Multifunction displays 30 Deine the vehicle parameters Once this menu has been selected, you can activate or deactivate the following equipment: Display coniguration Once this menu has been selected, you can access the following settings: Once you have selected a setting, press the navigator.

Turn the navigator to change the value of the setting selected. Press the navigator to record the change and move on to the next setting or press the ESC key to cancel. Duration of the follow-me-home lighting For safety reasons, conig-uration of the multifunction displays by the driver must take place when stationary. Press the 5 or 6 buttons to se-lect the menu required, then conirm by pressing the OK button.

Presentation This displays the following information, via the RD4 audio equipment control keypad: Personalisation-Coniguration menu Once this menu has been selected, you can gain access to the following functions: Multifunction displays 32 Deine the vehicle parameters Once this menu has been selected, you can activate or deactivate the folllowing equipment: Display coniguration Once this menu has been selected, you can gain access to the following settings: When you have selected a setting, press the OK button, then press the 7 or 8 buttons to change its value.

Press the OK button to record the change and move on to the next set-ting or press the ESC button to cancel. Fuel level low and vehicle function status messages e.

Automatic headlamp lighting activated dis-played temporarily, - the trip computer display, - the satellite navigation system dis-plays.

In order to enable you to use all of your system's functions, you have two CD-Roms: For further details regarding these functions, refer to the corresponding section. Multifunction displays 34 Display coniguration The Display coniguration menu provides access to the following pa-rameters: For safety reasons, conig-uration of the multifunction displays by the driver must take place when stationary.

Coniguration menu This provides access to successive conirmation windows. Multifunction displays 36 Display coniguration The Display coniguration menu provides access to the following parameters: Deine the vehicle parameters This enables you to activate or de-activate certain driving and comfort functions: Superimposed display This is a window which appears tem-porarily over the current application to announce a change of status of another application.

Permanent application This is the main application currently in use, displayed as the main screen window. Contextual menu This is a menu, limited to the main functions of the main application currently in use, displayed as the main screen window. Video menu You can connect video equipment camcorder, digital camera, DVD player, Videos can only be displayed when stationary.

Select the Video menu from the general menu: Windscreen de-icing or demisting vents. Front window de-icing or demisting vents. Side vents. Centre vents. Air outlet to front footwells. Air outlet to rear footwells. Advice on operation F If, when the vehicle has been parked in the sun for a long time, the interior temperature remains very high, do not hesitate to ven-tilate the passenger compartment for a few minutes. Place the air low control at a level suficient to ensure a good renewal of air in the passenger compartment.

When the air low control is in position 0 deactivation of the system , temperature related comfort is no longer guaranteed but a slight low of air, due to the movement of the vehicle, can still be felt. F For even air distribution, take care not to obstruct the exterior air in-take grille at the base of the wind-screen, the vents, the air outlets under the front seats and the air extractor located behind the laps in the boot.

Check that the passenger com-partment ilter is in good condi-tion. Have the ilters replaced regularly. If you drive in a dusty environment, change them twice as often. Switch off the rear screen and exterior mirrors de-misting as soon as you consider this necessary as reducing the current con-sumption reduces the fuel consumption.

Automatic operation 1. Automatic comfort programme When the engine is cold, to prevent too great a distribution of cold air, the air low will reach its optimum level gradually.

The driver and his front pas-senger can each adjust the temperature to their require-ments. The value indicated on the display corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit. Turn control 1 or 2 to the left or to the right respectively to decrease or increase this value. A setting around the value 21 pro-vides optimum comfort. However, depending on your requirements, a setting between 18 and 24 is normal.

For maximum cooling or heating of the passenger compartment, it is possible to go below the value 15 by turning un-til LO is displayed or above the value 27 by turning until HI is displayed. Automatic visibility programme The automatic comfort pro-gramme may prove inad-equate to quickly demist or de-ice the windscreen and side windows because of humidity, numerous passengers, ice, etc. In these cases, select the automatic visibility programme.

The button 4 indicator light comes on. The system automatically controls the air conditioning, the air low and the air intake and provides optimum distribution of the ventilation to the windscreen and side windows. Press the AUTO button.

The AUTO symbol is dis-played. We recommend the use of this mode: This system is designed to operate effec-tively in all seasons, with the windows closed. In the cabriolet position, the effective-ness of the system may be reduced.

Driver's side setting 3. Passenger side setting On entering the vehicle, if the interior temperature is much colder or warmer than the comfort value, there is no need to change the value displayed in order to obtain the com-fort required.

The system corrects the difference in temperature auto-matically and as quickly as possible. The other functions will still be managed automatically. Press the AUTO button to return to completely automatic operation. Press this button to stop the air cooling.

Press again to return to automatic operation of the air conditioning. Avoid prolonged use of this mode risk of condensation, odour, humi-dity. Press this button again as soon as possible. Air distribution adjustment Successive presses of this button allow the air low to be directed alternately to: Air low adjustment Press the small fan or large fan button respectively to decrease or increase the air low.

The air low symbol, the fan, ills progressively in relation to the value required. De-icing the rear window and the mirrors Switching the system off Press the small fan button of the air low 7 until the fan symbol disap-pears.

This action switches off all of the functions of the air conditioning sys-tem, with the exception of the demist-ing of the rear screen 9. Temperature-related comfort is no longer guaranteed but a slight low of air, due to the movement of the vehicle, can still be felt.

Pressing the large fan button of the air low 7 again or the AUTO but-ton again reactivates the system with the values set before it was switched off. Press this button to recir-culate the interior air. The air recirculation symbol 8 is displayed. Air recirculation prevents the entry of unpleasant odours and fumes from the outside. Avoid prolonged recirculation of the interior air risk of condensation and deterioration of the air quality.

As soon as possible, press this but-ton again to permit the intake of out-side air and prevent condensation. The button 9 indicator light comes on. The de-icing system switch-es off automatically to prevent an ex-cessive consumption of current.

It is possible to stop the de-icing be-fore it switches off automatically by pressing the button again. F Move knob B in all four directions to adjust.

F Return switch A to the centre po-sition. Folding - from inside: F with the ignition on, pull switch A rearwards. F lock the vehicle using the remote control or the key.

Peugeot CC - Owner's Manual ( pages)

Switch A must be pulled again. Unfolding - from inside: F unlock the vehicle using the remote control or the key. In certain cases of particu-larly arduous use towing the maximum load on a steep gradient in high tem-peratures , switching off the air conditioning permits the recovery of engine power and therefore an in-crease in the towing capacity.

In order for the air conditioning to be fully effective, the windows must be closed. The air conditioning system does not contain chlorine and does not present any danger to the ozone layer. Operate the air conditioning system for 5 to 10 minutes, once or twice a month, to keep it in perfect working order.

The water produced by the air con-ditioning condensation is discharged through an opening provided for this purpose. Therefore, a puddle of wa-ter may form underneath the vehicle when stationary. In order to ensure that the air con-ditioning system operates correctly, regular checks are also recom-mended. To prevent dazzling, the glass of the mirror darkens auto-matically depending on the intensity of the light from behind.

It clears as the light headlamps of following ve-hicles, sunlight decreases, ensuring maximum visibility. Manual interior mirror The interior mirror has two positions: To change from one to the other, push or pull the lever on the lower edge of the mirror. Operation Switch on the ignition and press switch 1: The mirror remains at its most clear. Special feature To ensure maximum visibility during manoeuvres, the mirror clears automatically when reverse gear is engaged. Adjust the height and depth of the steering wheel.

Peugeot - Owners Manual PDF

Lock it by pushing handle A down fully. Forwards-backwards adjustment Lift the control and slide the seat forwards or backwards. Driver's or passenger's seat height adjustment Pull the handle upwards or push it downwards as many times as necessary to obtain the required position.

Seat back angle adjustment Push the handle towards the rear. Access to rear seats Pull the handle to fold the seat back and move the seat forwards. On repositioning, the seat returns to its initial position.

Then adjust the angle. No person or object must prevent the seat slide from returning to its initial position; return to this position is necessary for the seat to lock in place. Head restraint height and angle adjustment To raise the head restraint, pull it upwards. To remove the head restraint, press the lug A and pull the head restraint upwards. To put the head restraint back in position, locate the stems of the head restraint in the holes taking care to keep them in line with the seat back.

To lower the head restraint, press the lug A and the head restraint at the same time. The head restraint has a frame with a notch which prevents the head restraint from lowering; this a safety device which provides protection in the event of an impact. Do not place any clothing on the rear head restraints. Heated seats switch Never drive with the head restraints removed; they must be in place and correctly adjusted. With the engine running, press the switch. The temperature is controlled automatically.

Pressing the switch again stops operation. The adjustment is correct when the upper edge of the head restraint is level with the top of the head. To tilt the head restraint, tilt the lower part forwards or backwards. Otherwise, the child would risk being seri-ously injured or killed if the air bag were to inlate.

For maximum safety, please follow these precautions: Intermediate longitudinal position. Groups 1, 2 and 3: Groups 2 and 3: Comfort 50 These are two rings located between the seat back and the seat cushion. Installed in the forwards facing position. Installed in the forwards facing position only. Secured without the top strap. Three child seat body angles: In this case, it is essential that they are secured to the vehicle's seat by means of the three point seat belt. Follow the instructions for itting the child seat indicated in the seat manufacturer's installation guide.

As a safety precaution, do not leave: To protect young children from the rays of the sun, it side blinds on the rear windows. Children under the age of 10 must not travel in the forward facing position on the front passenger seat, unless the rear seats are already oc-cupied by other children, cannot be used or are absent. Otherwise, the child would risk being seriously injured or killed if the air bag were to inlate. The incorrect installation of a child seat in a vehicle compromises the child's protection in the event of an accident.

Remember to fasten the seat belts or the child seat harnesses keeping the slack in relation to the child's body to a minimum, even for short journeys. For optimum installation of the for-ward facing child seat, ensure that the back of the child seat is in contact with the back of the vehicle's seat and that the head restraint does not cause any discomfort.

If the head restraint has to be re-moved, ensure that it is stored or attached securely to prevent it from being thrown around the vehicle in the event of sharp braking. Locking Using the remote control F Press button B to lock the vehicle. This action is conirmed by ixed lighting of the direction indicators for approximately two seconds. At the same time, the exterior mirrors fold back. If one of the doors or the boot is open, the central locking will not work.

Unlocking F Press button C to unlock the vehi-cle. This action is conirmed by rapid lashing of the direction indicators for approximately two seconds. At the same time, the exterior mirrors unfold. Deadlocking This renders the exterior and interior door controls inoperative.

Using the key F Turn the key in the lock on the driver's door to lock the vehicle. Each action is conirmed by ixed lighting of the direction indicators for approximately two seconds. Using the remote control F Pressing button B locks the vehicle. F A second press within ive seconds deadlocks the vehicle. F Turn the key a second time within ive seconds to deadlock the vehi-cle. Opening this door unlocks the passenger door,. The ignition key has an electronic chip which has a special code.

When the ignition is switched on, the code is recognised and starting is pos-sible. If the system does not function correctly , the service warning light comes on, accompanied by an au-dible signal and a message on the multifunction display.

In this case, your vehicle will not start. Changing the remote control battery Battery ref.: The information battery lat is given by displaying of the service warning light, accompanied by an audible signal and a message on the multi-function display. To replace the battery, unclip the cas-ing using a coin at the notch. If the remote control does not work after the battery has been changed, re-programme the remote control. Key in ignition A buzzer sounds on opening the driv-er's door, if the key has been left in the ignition.

Reprogramming the remote control Following disconnection of the vehicle's battery, replacement of the remote control battery or in the event of a remote control malfunction, the remote control must be reinitialised. F Switch off the ignition. F Switch the ignition on again. F Press the remote control locking button immediately for a few seconds. F Switch off the ignition and remove the remote control key from the ignition lock. The remote control is now working again.

Locating your vehicle To locate your vehicle, if you have locked it, in a car park: F press button B, the courtesy lights come on and the direction indica-tors lash for a few seconds. When the vehicle is locked, if unlocking is activated in-advertently without a door being opened within 30 seconds, the vehicle will lock automatically.

Partial opening of the boot F Press button D to unlock and par-tially open the boot. This action also unlocks the doors. Accesses 54 Make a careful note of the number on each key. The key number is coded on the label attached to the key. The high frequency remote con-trol is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock your vehicle, without you being aware of it.

The remote control does not oper-ate when the key is in the ignition, even when the ignition is switched off, except for reprogramming.

Do not operate the deadlocking function if there is anyone inside the vehicle. Driving with the doors locked may make access to the passenger compartment by the emergency services more dificult in an emer-gency. As a safety precaution with chil-dren on board , remove the igni-tion key when you leave the vehi-cle, even for a short time. Do not repeatedly press the but-ton of your remote control out of range and out of sight of your ve-hicle.

You run the risk of stopping it from working and the remote control would have to be repro-grammed. When downloading a second-hand vehicle: Do not make any modiications to the electronic engine immobiliser system. This code is hidden by a ilm, which should be removed only if necessary. Keep your card in a safe place, never inside the vehicle. When undertaking a long trip or jour-ney, however, it is advisable to take it with you along with your personal papers.

Do not throw the remote control batteries away, they contain metals which are harmful to the environ-ment. Take them to an approved collection point.

When the alarm is triggered, the si-ren sounds and the direction indica-tor lights lash for thirty seconds. After triggering, the alarm remains set. F Switch off the ignition, F In the next ten seconds, press button A until the indicator light is on continuously, F Get out of the vehicle, F Set the alarm by locking or dead-locking using the remote control button A indicator light lashes once a second. In order for the alarm to be set in this mode, these operations must be carried out each time the ignition is switched off.

Setting the alarm F Switch off the ignition and get out of the vehicle. F Set the alarm by locking or dead-locking using the remote control button A indicator light lashes once per second. Disarming Unlock the vehicle with the remote control key button A indicator light goes out. To set the alarm with exterior protection only If, while you are away from the vehicle, you wish to leave a window partially open or a pet inside the vehicle, you should choose exterior protection only.

Incorrect operation When the ignition is switched on, if button A lights for ten seconds, there is a fault in the siren connection. In order to avoid accidental triggering of the alarm when a door or the boot is opened, it is essential to irst press the unlocking button on the remote control. If the alarm has been trig-gered ten times in succes-sion, on the eleventh time it becomes inactive. If button A indicator light lashes rap-idly, the alarm has been triggered while you were away from your vehicle.

When washing your vehicle, to avoid triggering the alarm: Failure of the remote control F Unlock the door with the key and open it.

The alarm is triggered. F Switch on the ignition.

The alarm is disarmed. Driver's electric window switch. Passenger's electric window switch. Rear right electric window switch. Rear left electric window switch. Disarming of the rear electric window switches child lock. You have two options: Press or pull the switch gently. Press or pull the switch fully: Pressing the switch again stops the movement of the window. Front windows safety auto-reverse When the window rises and meets an obstacle, it stops and partially lowers again.

Disarming the rear window controls For the safety of your children, press switch 5 to prevent operation of the rear windows irrespective of their position. When the button is lowered, the con-trols are active. When the button is raised, the con-trols are disarmed. Approximately 45 seconds follow-ing removal of the ignition key, none of the windows can be opened or closed. The ignition must be switched on again to permit opening or closing of the windows. The rear windows do not close auto-matically.

In the event of unwanted opening of the window on closing for example in the presence of frost , press the switch until it opens completely, then pull it immediately until it closes. Continue to hold the switch for ap-proximately one second after the window has closed.

The safety auto-reverse function is not active during these opera-tions. To disarm the action of control 6 , press the rear windows disarming control 5.

Operation of the simultane-ous control of all four win-dows is the sole responsi-bility of the driver. Always remove the key from the ignition when leav-ing the vehicle, even for a short time.

In the event of contact dur-ing operation of the windows, you must reverse the movement of the window. To do this, press the switch concerned. When the driver operates the pas-senger electric window switches, he must ensure that no one is prevent-ing correct closing of the windows. The driver must ensure that the pas-sengers use the electric windows correctly. Be aware of children when operating the windows.

Accesses 58 Door open alert If a door has not been closed pro perly: This is accompanied by an audible signal, a diagram and a message on the multifunction display for a few seconds. Opening the doors from inside The door opening controls do not function when the vehicle is dead-locked. It rises again after a few seconds and adjusts automatically on closing to provide perfect sealing. Remove your hand to reactivate the system. Reinitialisation of the automatic partial opening of the door win-dows Carry out this operation following reconnection of the battery and reinitialisation of the electric windows see corresponding section: F partially open the door, F close the door, F wait for a few seconds, F place your hand behind the handle, the window automatically lowers by a few millimetres.

Before carrying out any work which requires cut-ting off of the battery, lower the windows to make it easier to open and close the doors. In the event of a battery cut-off, it is still possible to open the doors. However, it is imperative that the door is not slammed on closing. It will be necessary to reinitialise the window controls and the automatic partial opening of the door windows. The red indicator light on the button comes on when the vehicle is locked and is switched off when the vehicle is unlocked.

In this case, use the key or the remote control to unlock. You can activate or disarm this func-tion. Activation Press and hold button A. Activation of the function is accom-panied by a message on the multi-function display. Disarming Press and hold button A. Disarming of the function is accom-panied by a message on the multi-function display.

Notes If one of the doors is open, the au-tomatic central locking and locking from the inside do not function. If the boot is open, the automatic central locking of the doors is active. Passenger's door - to lock, insert the key in the lock located on the edge of the door then turn an eighth of a turn to the right. To protect the boot against theft, but-ton E can be disarmed. Turn the lock F a quarter of a turn to the right using the key.

The boot can only be opened using the remote control. This action will also unlock the doors. Boot open warning If the tailgate is not properly closed: It is accompanied by an audible signal, a diagram and a message on the multifunction display for a few se-conds. Closing the boot F Use the interior grab handles to close the boot. F Press the centre of the boot with both hands until it locks.

F Close the boot correctly. F Turn the ignition switch to the run-ning position.

It is advisable to carry out the operation with the engine running. When carrying out this manoeuvre, the four windows lower, the boot opens, the hinged covers unfold, the roof folds up and stores itself in the boot, the moving shelf positions itself, then the boot closes.

The control buttons for the windows become operational again at the end of the roof operation. Opening the roof F Carry out the preparatory opera-tions, indicated opposite.

F Then, pull switch 5 until the roof opening operation is complete, conirmed by an audible signal and a message on the multifunc-tion display. Accesses 62 Closing the roof F Carry out the preparatory opera-tions, indicated on the previous page. F Then, press button 5 until the roof closing operation is complete, conirmed by an audible signal and a message on the multifunc-tion display. When carrying out this manoeuvre, the four windows lower, the boot opens, the moving shelf and the roof unfold and position themselves, the hinged covers fold, then the boot closes.

In the case of an electric or hydraulic malfunction of the roof, switch off the ignition, restart the engine, then start the required operation again. If the problem persists, it is possible to close the roof manually. To do this, please consult the breakdown procedure described at the end of this handbook roof emergency mode.

During roof opening and closing operations, to avoid any risk of injury, ensure that there is no-one in the proximity of the moving parts. Operation of the roof is the sole re-sponsibility of the driver. After rain or washing the vehicle, it is advisable to wait for the roof to dry before opening it. To guarantee correct operation, do not release button 5 when the roof is in an intermediate posi-tion neither completely open nor completely closed. However, in the event of danger, release the control knob and the operation will stop instantly.

Once the dan-ger has been eliminated, complete the operation. F Open the fuel iller lap. F Insert the key then turn it to the left. F Remove the cap and hang it on the hook located on the inside of the lap. A label afixed to the inside of the fuel iller lap indicates which type of fuel to use.

When you ill your tank, do not con-tinue after the third cut-off of the pump. This could cause your vehicle to malfunction.

The capacity of the tank is ap-proximately 60 litres. F After illing the tank, lock the cap and close the fuel iller lap. You can still drive approximately 30 miles 50 km. Operating fault With the ignition on, if the fuel gauge needle remains in or returns to the rest positon below zero , this indicates a malfunction of the fuel gauge. Front fog lamps and rear fog lamp 2nd forwards turn of the ring Note: Turn the ring backwards to switch off the front fog lamps, the side lights will then be switched off only when the lights are switched off automatically.

Front fog lamps and rear fog lamp ring B Turn ring B forwards to switch on and backwards to switch off. The status is conirmed by the light on the instru-ment panel.

Lights on buzzer With the ignition off and the automat-ic switching on of the lights deactivat-ed, when the driver's door is opened, a buzzer sounds to warn you that you have left your lights on. In good or rainy weather, both day and night, the front fog lamps and the rear fog lamp are dazzling and are prohibited.

Do not forget to switch them off when they are no longer needed. They switch off as soon as the light becomes bright enough or the windscreen wipers stop. As a consequence, the lights will not come on automatically. Deactivation The deactivation of this function is accompanied by a message on the multifunction display. The function is deactivated tempo-rarily when you use the manual lights stalk.

If the brightness sensor does not function correctly, the lights come on accompanied by the service warning light, an audible signal and a message on the multifunction dis-play.

Manual Follow-me-home lighting When the automatic switching on of the lights function is deac-tivated , the side lights and dipped headlamps remain on for the dura-tion selected for the automatic fol-low-me-home lighting. If the vehicle is not itted with the automatic switching on of the lights function , when you leave your vehicle, the side lights and dipped headlamps remain on for thirty seconds.

Direction indicators lashers Left: Automatic Follow-me-home lighting With the ignition off, when you leave your vehicle with the automatic switching on of the lights func-tion activated , the side lights and dipped headlamps remain on for the selected duration. F switch off the engine, F lash the headlamps, F get out of the vehicle and lock it. F lash the headlamps again, F get out of the vehicle and lock it. To deactivate or activate this function, go to the mul-tifunction display conigura-tion menu.

The duration of the timed period must also be set 15, 30, 60 seconds , via the multifunction display coniguration menu. F lash the headlamps, F get out of the vehicle and lock it. To switch the function on or off, use the multifunc-tion display coniguration menu. Activation The activation of this function is ac-companied by a message on the multifunction display. The function is activated when the manual lights stalk is in position 0.

Do not cover the brightness sensor, coupled with the rain sensor, located in the centre of the windscreen, behind the interior mirror. It is used for the automatic switching on of the lights.

Thank you for visiting OnlyManuals.com

Initial setting is position 0. The driver is then assured of having optimum lighting and not causing a nuisance to other road users. In cases of malfunction , the service warning light comes on on the instru-ment panel, accompanied by an audible signal and a message on the multifunction dis-play. The system places your head-lamps to the low position. Do not touch the xenon bulbs. The instruments and con-trols instrument panel, multifunction display, air conditioning control pan-el, This warning light comes on on the instrument panel.

This action enables you to position the wiper blades for winter parking, cleaning or replacement See section Practical information - Changing a wiper blade.

To park the wipers after this has been done, switch on the ignition and op-erate the stalk. Windscreen and headlamp wash Pull the windscreen wiper stalk to-wards you. The windscreen wash then the wind-screen wipers operate for a ixed period. The headlamp wash is also activated, if the headlamps are on. In the I ntermittent position, the wip-ing speed is in proportion to the ve-hicle speed.

Front windscreen wiper with automatic wipe 2 Fast wipe heavy rain. In the I ntermittent position, the wiping speed is in proportion to the speed of the vehicle.

In AUTO mode, the wiping speed is in proportion to the intensity of the rainfall. The irst press of the stalk downwards activates the automatic wipe. Subsequent presses trigger a single wipe. Visibility 68 Automatic windscreen wipers In AUTO mode, the windscreen wip-ers operate automatically and adapt their speed to the intensity of the rainfall. Do not cover the rain sen-sor located on the wind-screen behind the interior mirror.

When using an automatic car wash, switch off the ignition.This is conirmed by ixed lighting of the direction indicators for approximately two seconds. As soon as you remove the child seat, turn the air bag switch to the ON position, to activate the air bag again. There is a risk of damage to the injection system. Special feature To ensure maximum visibility during manoeuvres, the mirror clears automatically when reverse gear is engaged.

If this warning light comes on, accompanied by a buzzer and a message on the multifunction display , contact a PEUGEOT dealer to have the system checked. Note: if the mirrors are folded using switch A , they will not unfold when the vehicle is unlocked using the remote control or the key. Flat tyre Sensor s not detected or faulty Notes: This will enable you to obtain a duplicate socket from a Peugeot dealer.

Stop immediately in the last two cases. The mirror remains at its most clear.